Reducer, such as equipment, transmission equipment, precision planetary gear reducer to adjust the common method of professionals to adjust the gap method, the error compensation method, parts repair to change the law and with a total of four kinds of parts method.
First, adjust the gap method
In the spiral lift transmission machinery and equipment, the prevalence of the relative motion of the internal parts. There is movement there is friction, there is friction necessary to cause the relevant parts of size, shape and surface quality, resulting in wear and tear, increased with the gap between the related parts. Only by adjusting the gap after the gap over a reasonable range, in order to ensure the accuracy of the relative motion between the parts. Therefore, the moving parts of machinery and equipment, general design gap adjustment mechanism. Gap adjusting mechanism to adjust the gap is to ensure equipment accuracy and stability of the most common and easiest method.
(1) deceleration of the machine spindle rotation accuracy adjustment
Reducer spindle rotation accuracy in the machining error of the spindle itself to meet the requirements under the premise, in general, to a large extent by the bearing to decide. Spindle Error adjustment key is to tune the bearing clearance. To maintain a reasonable amount of bearing clearance on the performance and bearing life in spindle assembly is of great significance. Rolling is a larger gap, not only cause the load to focus on the role of in force on the direction of the rolling element above, and in the bearing outer raceway contacts generated at the severe stress concentration shorten the bearing life, but also the spindle centerline drift phenomenon is easy to cause the vibration of the spindle assembly. Rolling adjustment to pre-load bearing internal to produce a certain amount of interference caused by the rolling element and the outer raceway contact at a certain amount of elastic deformation, in order to improve the rigidity of the bearing. Is naturally extremes meet, if the pre-load is too large, will inevitably lead to increased wear of rolling bearings, the occurrence of a short period of time damage phenomena.
2 precision adjustment of rail-oriented
For general machinery and equipment, the gap between the slide rail is appropriate, usually 0.03mm or 0.04mm thick feeler gauge inserted in the end parts of the inspection, the required insertion depth should be less than 20mm. If the rail gap is inappropriate, must be adjusted in a timely manner.
(3) the gap between the worm screw lift screw and nut adjustment
Screw-nut drive screw lift is one of the most common organization of the linear motion. With screw and nut, it is difficult to be no gap. Especially after the use of a stage, due to wear, but will increase the gap, affect the device to work. Therefore, the equipment repair process, attention is necessary to eliminate the gap between the screw and nut.
all toner
Friend link
Other Blogs







